rc:prj:startbox:v1.0:50_proc:99_troubleshoot

Troubleshooting

box does not power on (red light above power switch stays off)
- remove panel
- check polarity of the cables.
- check batteries
- check connection from batterie to power cable and pcb
- check fuse and connection to pcb
- check connection from power switch to pcb
- check connection from led to pcb

box powers on but key switch does not work (led above key switch stays off)
- remove panel
- check connection from key switch to pcb
- check connection from led to pcb

arm switch does not work (green or yellow led not light up or neither green or yellow led lights up)
- remove panel
- check all connections from arm switch to pcb
- check connections from green and yellow led to pcb

box is powered on, armed and ignitor connected but led above startbutton does not power on and buzzer is beeping
- remove panel
- check led connection to pcb

box is powered on, armed and ignitor connected and led above startbutton lights up but buzzer is silent
- remove panel
- check buzzer connection to pcb

box is powered on, armed and ignitor connected but led above startbutton does not power on and buzzer stays silent
- move arm switch down to safe position
- power off!
- check ignitor cables
- check ignitor

rc/prj/startbox/v1.0/50_proc/99_troubleshoot.txt · Last modified: 2020/09/07 23:57 by kalle